![]() If you want to use Grafana without having to go through a full installation process, check out Grafana Cloud, which is designed to get users up and running quickly and easily. If the Raspberry Pi is ever restarted or turned off, Grafana will start up whenever the machine regains power. Log in to Grafana with the default username admin, and the default password admin.Ĭhange the password for the admin user when asked.Ĭongratulations! Grafana is now running on your Raspberry Pi. You’re greeted with the Grafana login page. Open a browser and go to where the IP address is the address that you used to connect to the Raspberry Pi earlier. Grafana is now running on the machine and is accessible from any device on the local network. Start the Grafana server: sudo /bin/systemctl start grafana-server To make sure Grafana starts up even if the Raspberry Pi is restarted, we need to enable and start the Grafana Systemctl service.Įnable the Grafana server: sudo /bin/systemctl enable grafana-server ![]() Grafana is now installed, but not yet running. Now that you’ve got the Raspberry Pi up and running, the next step is to install Grafana.Īdd the APT key used to authenticate packages: wget -q -O - | sudo apt-key add -Īdd the Grafana APT repository: echo "deb stable main" | sudo tee -a /etc/apt//grafana.list Once you’re logged in, change the default password: passwdĬongratulations! You’ve now got a tiny Linux machine running that you can hide in a closet and access from your normal workstation.When asked for a password, enter the default password: raspberry.Open up your terminal and enter the following command: ssh SSH warns you that the authenticity of the host can’t be established.Usually you can find the address in the control panel for your WiFi router. Find the IP address of the Raspberry Pi.Connect the power cable and make sure the LED lights are on.Eject the SD card and insert it into the SD card slot on the Raspberry Pi.(Optional) Create a file called wpa_nf in the boot directory: ctrl_interface=/var/run/wpa_supplicantĪll the necessary files are now on the SD card. Otherwise, connect the it to your network by using a network cable. The next step is only required if you want the Raspberry Pi to connect to your wireless network. This enables SSH so that you can log in remotely. While you could fire up the Raspberry Pi now, we don’t yet have any way of accessing it.Ĭreate an empty file called ssh in the boot directory. Eject the SD card from your computer, and insert it again.When you do, the imager will write the Raspberry Pi OS Lite image to the SD card and verify that it has been written correctly. The final step in the imager to click Write. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |